Removing and installing the rear light in the sidewall of the body

Rear light in the side wall of the body can not be further disassembled. It contains the following components:

- Rear light bulb;

- Lamp signals braking;

- Lamps rear indicators

Withdrawal

Turn the ignition and all electrical consumers and turn the key in the position 0 (pre-emphasis).

Unlock service cover 1 in the direction of the arrow from the side cladding 2 (Fig. 7.87).

Unlock plug 2 by pulling the lock button 3 in the direction of the arrow and remove the plug from the tail light (Fig. 7.88).

1 Turn off fixing nuts and remove taillight down from the body side.

Setting

Install in reverse order, with the following should be considered.

3 Tighten mounting nuts to specified torque (Fig. 7.88).

The plug is installed correctly, if the lock button 3 again drowned.