add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Touareg (from 2003 to 2006, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Touareg
Home
 
Volkswagen
Touareg
Operation and maintenance of car
eleven Overview
Keys and door locks, power windows
Controls and control devices
Climate control
Seats
Security systems
Maintenance and driving
Engine start
Emergency taking out the ignition key
Start the gasoline engine
Start the diesel engine
Stop the petrol engine
Keyless access
Automatic transmission
Manual gear changes - ?�Tiptronic?� (selector)
Kick-down
Manual Transmission
Air suspension
Damping Control
Parking brake
Parking
Cruise control (GRA)
Design features an off-road vehicle
Differential locks
Intelligent Systems
Power steering
Catalytic converter
Additional equipment of a vehicle trailer tow hitch
The work in the engine compartment
The battery (s)
Wheels and tires
On-board tools, spare wheel, a tire repair kit, the jack
Replacement wheels
Circuit breakers
Help when starting the engine
Towing
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Circuit breakers



Replacing fuses
According to the table, set the fuse, in which the mounting block and under what number is defective fuse.

NOTE
Circuits protected by fuses. It will be several different car spare fuses.

Turn off the ignition and idle electrical appliance.
Remove the cover from the mounting block.
Tweezers, remove the fuse from the mounting block.
If the fuse (seen in the molten bridge), replace it with a new fuse of the same current (the same color and with the same label), and the same size.

NOTE
If the new fuse after a short time, too, is blown, check the electrical appliance in a specialized workshop.
If you put a fuse, designed for higher current may cause failures in other circuits.

Colour coding of fuses

Mounting the unit in the dash panel on the left
Mounting block under the hood.
Mounting block is closed.

Cover mounting unit
Fig. 1.147. Cover mounting unit


To remove the lid - insert the flat end of a screwdriver into the hole in the cover 1 (Fig. 1.147).
Remove the cover in the direction of the arrow 2.
The casing is placed a plastic tweezers for removing the fuse.

Fuse
Fig. 1.148. Fuse


The mounting block has room for two spare fuses A (Fig. 1.148).

Mounting block in front of the right side
Mounting block is closed.

Cover mounting unit
Fig. 1.149. Cover mounting unit


To remove the lid - insert the flat end of a screwdriver into the hole in the cover 1 (Fig. 1.149).
Remove the cover in the direction of the arrow 2.
The casing is placed a plastic tweezers for removing the fuse.

Fuse
Fig. 1.150. Fuse


The mounting block has room for two spare fuses A (Fig. 1.150).




« previos page
Replacement wheels
next page »
Help when starting the engine

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.