printable version
Removing and installing V-ribbed belt (gasoline engine 3,2L)
Withdrawal Mark direction of travel V-ribbed belt.
Suitable wrench push the tension lever in the direction of the arrow (Fig. 2.4). Screw the bolt into the threaded hole M8h50 A, fixing the so-ribbed belt tensioning roller.
NOTE Screw the bolt just enough to ensure the removal of V-belt, otherwise it may be damaged body tension roller. |
Remove the serpentine belt.
Setting Before installing poly V-belt, check and tighten all assemblies (generator, air conditioning compressor, vane pump). Check ease of rotation of the vent clip. When installing the V-ribbed belt in the proper direction of travel and the correct position of the belt on the pulleys. Route the serpentine belt and unscrew a bolt M8 tension roller.
| Fig. 2.5. Check travel accessory drive belt
|
Start the engine and check the progress of the belt (Fig. 2.5).
|