add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Touareg (from 2003 to 2006, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Touareg
Home
 
Volkswagen
Touareg
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Overview
Generator and starter
Device combination
Front wiper
general description
Removing the leash wiper on the driver
Removing the leash wiper on the passenger side
Opening the casing plenum chamber
Removing trapeze wiper rods and wiper motor V
Installation of trapeze wiper rods and wiper motor V
Installing casing plenum chamber
Setting up the initial position of wiper blades
Removing and installing wiper "aero"
Headlights
Tables
Body
diagrams
 


Hit Counter by Digits


print page printable version

Installing casing plenum chamber



Install plenum chamber cover in the reverse order.

Install wiper arms
Set leashes driver's side and passenger's side on their shafts.
Lightly tighten the retaining nut on the shaft driver on the driver's side.
1 Put a washer onto the shaft wiper arms.

Removing the cone
Fig. 7.80. Removing the cone


Insert the cone 3 wiper arm 2 (Fig. 7.80).

Nuts wiper arms and crank
Fig. 7.79. Nuts wiper arms and crank


Lightly tighten the retaining nut on the shaft 2 leash on the passenger side (Fig. 7.79).

NOTE
Fixing nut shaft wiper arms must be tightened fully until after setting the initial position of the wiper blade.

Tighten the fixing nut axis leash wiper on the passenger side.
Tighten the fixing nut 1 axis leash wiper on the passenger side to the specified torque (Fig. 7.79).
Adjust the starting position of wiper blades




« previos page
Installation of trapeze wiper rods and wiper motor V
next page »
Setting up the initial position of wiper blades

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.