printable version
Applying sealant
The order of execution of works Remove residual sealant on the oil sump with a rotating brush attachment, such as a hand drill with a set of brushes, nozzles with plastic bristles (wear goggles). Clean seating surfaces. They must be free of oil and grease.
NOTE Follow the shelf life of the sealant. The oil pan to be installed within 5 minutes after sealant application. |
Cut the tip of the tube at the front marking (F holes about 3 mm). Apply sealant to clean the seating surface of the oil pan. Harness the sealant should be 2-3 mm in thickness In places holes fastening screws, apply sealant on the inside.
The application of sealant on the oil sump
| Fig. 2.264. The scheme applying sealant to the surface of the oil sump
|
Apply sealant to clean the seating surface oil pan as shown in Figure 2.264.
The application of sealant on the oil pan
| Fig. 2.265. The scheme applying sealant to the surface of the oil pan
|
Apply sealant to clean the seating surface of the oil pallet as shown in Figure 2.265.
|