REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Possible malfunctions of the body, their causes and remedies
			Removing, dismantling and installation of bumpers
				Removing, dismantling and installation of the front bumper
				Removing, dismantling and installation of the rear bumper
			Removing and installing radiator grille
			Removal and installation of mudguards of wheels and Lockers
			Removal and installation of a forward wing
			Removal and installation of a lattice box vozduhopritoka
			Hood
			Door
			The trunk lid
			Manhole cover fuel tank filler pipe
			Seats
			Removal and installation of facing of a tunnel floor
			Restraint System (SRS)
			Rear view mirrors
			Dashboard
			Heater and air conditioning
			Interior fittings
			Removal and installation of facing of salon
			Removal and installation of facing the boot
			Windscreen wiper
			Replacement of the fixed glass body
			Removing and installing the attachment flanges of the battery
			Care body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

Removing, dismantling and installation of the front bumper

You will need: all the tools necessary to remove the mud flaps and the front wheel arch liners (see. "Removal and installation of mudguards of wheels and Lockers"), as well as the key "10" face head "12", Phillips screwdriver blade.

1. On both sides of the car, remove the mud flaps and the front wheel arch liners (see. "Removal and installation of mudguards of wheels and Lockers").


2. Open the hood, place it on the palm and turn away a nut of the top fastening of the front bumper to the body on the left ...	3. ... and right.


4. The front wheel arches, unscrew the two screws securing the front bumper to the body ...	... 5. Turn out one bolt of the bottom fastening ...


6. ... one screw side mounting ...	7. ... and remove the front bumper.


8. If necessary, remove the five screws fixing the frame energy absorbing element to the top edge of the bumper, four screws - to the lower edge of the bumper ...	9. Remove the frame ... ...

10. ... and the energy-absorbing element.

11. Assemble and install the front bumper and all removed parts in reverse order of removal.