add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Design Features
Possible malfunctions of the body, their causes and remedies
Removing, dismantling and installation of bumpers
Removing, dismantling and installation of the front bumper
Removing, dismantling and installation of the rear bumper
Removing and installing radiator grille
Removal and installation of mudguards of wheels and Lockers
Removal and installation of a forward wing
Removal and installation of a lattice box vozduhopritoka
Hood
Door
The trunk lid
Manhole cover fuel tank filler pipe
Seats
Removal and installation of facing of a tunnel floor
Restraint System (SRS)
Rear view mirrors
Dashboard
Heater and air conditioning
Interior fittings
Removal and installation of facing of salon
Removal and installation of facing the boot
Windscreen wiper
Replacement of the fixed glass body
Removing and installing the attachment flanges of the battery
Care body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removing, dismantling and installation of the rear bumper



You will need: all the tools necessary to remove the mud flaps and wing flaps of the rear wheels (see. "Removal and installation of mudguards of wheels and Lockers"), facing the rear lights and the rear end panel (see. "Removal and installation of facing the trunk"), as well as face head "10", Phillips screwdriver blade.
1. On both sides of the car, remove the mud flaps and the rear wheel arch liners (see. "Removal and installation of mudguards of wheels and Lockers").
2. Open the boot lid and remove the lining of the rear lights and the rear end panel (see. "Removal and installation of facing the boot").
3. On both sides of the luggage compartment, unscrew the nuts and remove the bolts to the ends of the bumper body.
4. Inside the arches on both rear wheels turn out even one bolt fastening the ends of the bumper to the body.
5. Remove the four screws that secure the bumper to the rear end panel ...
6. ... and remove the rear bumper.
7. If necessary, loosen the trunk from inside the two nuts lateral energy absorbing element ...
8. ... and remove the energy absorbing element. Similarly remove the second side energy-absorbing element.
9. If necessary, remove the four screws securing the main energy absorbing element to the rear bumper ...

NOTE
So arranged fastening screws of the central energy absorbing element to the bumper.

10. ... and remove the central energy-absorbing element.
11. Assemble and install rear bumper and all removed parts in reverse order of removal.




« previos page
Removing, dismantling and installation of the front bumper
next page »
Removing and installing radiator grille

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.