printable version
Removing and installing drive tailgate lock
You will need a key "10" (convenient to use face head).
NOTE End panel lining was removed in the process of removing the tailgate lock (see. P. 1). |
| | 4. Turn out through a window in the floor mat bolt unit handles. | 5. Bend the edge of the mat and pull the rug from under the unit handle with Bowden cable, extending the unit through a window in the floor cross member. |
6. Remove the bracket from the slot unit levers tip sheath lock actuator trunk and removing the cable end of the lever slot, disconnect the cable.
NOTE If necessary, disconnect the unit is similar to the arms control cable lock hatch of a bulk pipe of a fuel tank (white tip) and remove the unit handles. |
7. Remove the cover of a cable from the holder on the left verge of the floor and remove the drive cable lock the trunk, pulling him into the trunk through the hole in the wall of the body.
|