printable version
Polishing Paint
HELPFUL ADVICE Do not keep the car under the rubberized case and do not put on the painted surface of a body of rubber items they left on the paintwork (especially light) dark spots, which are not removed by polishing. |
To preserve the appearance and content of his body for a long time in good condition should be periodically polish the paintwork of the body. Polishing agent selected according to the state of coverage, obey the recommendations for use. The first 2-3 months of operation of the car wash coated body with cold water. For polishing new cover (up to 3 years), use non-abrasive polishing tools for new coatings. When driving from 3 to 5 years are recommended to avtopoliroli weathered coatings, which include a small amount of abrasives. After 5 years of intensive use, use avtopoliroli for old coatings. To avoid drying polishes treat the body clean flannel hand in small areas. In order to eliminate minor defects refinishing can use polishing paste PMA-1 and PMA-2. Polishing can be manually or mechanically flannel tsigeykovymi circles. Before use, mix the pasta with the thickening dilute it with water. After polishing, wipe the surface with a clean flannel. Small chips and scratches, does not violate the soil layer, paint with a fine brush. If the layer of soil is broken, smooth out the damaged area with fine sandpaper, removing corrosion. Denuded seat cover layer of soil (from the spray gun, brush or aerosol). When the soil is completely dry, paint enamel damaged area. If the paintwork of the car hit the bitumen, immediately remove it with white spirit or avtoochistitelem bitumen stains. Bitumen causes yellow spots, especially noticeable on light paintwork. At least once every two years must be treated with preservative agent of the "Movil" cavities of the body and applied to the surface of the wheel arches and underbody corrosion paste. We recommend to carry out this work at the service station.
|