Cleaning Engine

During operation of the vehicle on the outer surfaces and engine components accumulate deposits of dirt and oil. In the oil sump of the engine oil cooling, they degrade, thereby decreasing its viscosity, engine parts wear out rapidly. The accumulated near the engine oil dipstick abrasive particles each time checking the oil level can get into the crankcase. Dirt and oil on the elements of engine management systems, electric equipment and high-voltage wires of the ignition system in the engine compartment to create (especially in wet weather) unwanted electrical circuits that make it difficult to start the engine and lead to a disruption in its work. Finally, a highly contaminated engine does not pass inspection.

Clean the cylinder head, cylinder block and the oil sump of the engine with special detergents to remove all kinds of pollution. Detergents and purchased in the store can be divided into two groups:

- Shampoo for cleaning the engine;

- Universal means of, for example, for cleaning the engine and remove the bitumen stains with body paint.

From the available tools can be used in aqueous solution of laundry detergent or dishwashing liquid.

Hold engine washing is preferred in special car washes. This most standard service car washes: the engine is first treated with a special composition, then washed manually, after which it was rinsed with water under pressure, and dried with compressed air. After washing, check the operation of electrical appliances and motor operation.

During the cleaning of the engine in the "home" conditions, you need a small scraper, paint brush, toothbrush (for hard to reach places), a bowl of water or a garden sprayer. Significant deposits of dirt and oil, you must first remove the scraper. If the wiper is not at hand, then to remove any dirt and oil is well suited screwdriver with a long handle, and it is better - a wooden spatula. Blow After washing the engine with compressed air.