REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
			Engines SOHC
				Technical data
				Toothed belt
				Check toothed belt tension
				Adjusting the tension of the toothed belt
				Ribbed Belts
				Engine Supports
				The front cover and the oil pump
				Air filter (ACL)
				Cylinder head
				Rocker
				Hydraulic jacks of backlashes of valves
				Replacing the valve seat
				Replacing the valve guide
				Valve
				Camshaft
				Cranks
				Crankshaft
				Flywheel
				The piston pin
				An exhaust manifold
				Intake manifold and the air chamber
				Cylinder block
				Removing and installing engine and gearbox
				Exhaust
				Troubleshooting
			Engines DOHC
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Flywheel

1 - a ring gear;
2 - a flywheel;
3 - a bolt, 130-140 N ??? m;
4 - drive plate;

5 - an adjusting plate;
6 - bolt 130-140 N ??? m;
7 - adjusting plate.

Withdrawal

PERFORMANCE ORDER

1. Remove the gearbox and clutch.

2. Remove the bolts and remove the flywheel. If the car has an automatic transmission, remove the drive plate. When releasing the flywheel lock bolts from turning.

Check

PERFORMANCE ORDER

1. Check the condition of the surface of the flywheel contacting the clutch disc. If there is a significant deterioration replace the flywheel.

2. Check flywheel runout surface in contact with the clutch plate.

Heartbeat: 0.1 mm

3. Check the condition of the flywheel for damage and wear and replace it if necessary.

Setting

PERFORMANCE ORDER

Install the flywheel or the drive plate to the crankshaft. The special tool, lock the flywheel from turning and tighten the flywheel bolts.

Torque: 130-140 N ??? m

« previos page
Crankshaft

next page »
The piston pin