REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
			Technical data
			The mechanism of the tilt steering column
			Steering transfer without power steering
			Tie Rod
			Check backlash steering wheel for vehicles with power steering
			Checking steering angle of front wheels
			Check torque pin of the spherical rod end
			Check of effort of the steering wheel for vehicles with power steering
			Checking the steering wheel return to its original position
			Check the fluid level
			Liquid replacement in a hydraulic drive the power steering
			Bleeding the hydraulic system of the power steering
			Checking the belt drive power steering pump
			Checking the fluid pressure in the hydraulic system
			Steering transfer of cars with power steering
			The power steering hoses
			Power steering pump
			Troubleshooting (steering without the amplifier)
			Troubleshooting (power steering)
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Checking the fluid pressure in the hydraulic system

PERFORMANCE ORDER

	1. Disconnect the pressure hose from the power steering pump. Between pressure hose disconnected and the pump connect the special measuring tool, as shown in the figure.
2. Bleed the hydraulic power-assisted steering, and then start up the engine and turn the steering wheel several times so that the liquid temperature rose to 50 ?� C.
3. Increase the engine speed to 1000min ^-1.
4. Close the valve switch the special tool and measure the pressure. The fluid pressure generated by the power steering pump: 6.2 MPa
A warning Do not hold the valve closed switch special tools for more than 10 seconds.
5. Remove the special tools, and connect the discharge hose to the pump, tighten the hose nut torque. Torque: 55-65 N ??? m
6. Remove air from a hydraulic drive power steering.