add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Steering
Technical data
The mechanism of the tilt steering column
Steering transfer without power steering
Tie Rod
Check backlash steering wheel for vehicles with power steering
Checking steering angle of front wheels
Check torque pin of the spherical rod end
Check of effort of the steering wheel for vehicles with power steering
Checking the steering wheel return to its original position
Check the fluid level
Liquid replacement in a hydraulic drive the power steering
Bleeding the hydraulic system of the power steering
Checking the belt drive power steering pump
Checking the fluid pressure in the hydraulic system
Steering transfer of cars with power steering
The power steering hoses
Power steering pump
Troubleshooting (steering without the amplifier)
Troubleshooting (power steering)
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Troubleshooting (power steering)



Sign
Probable Cause
Remedy
Increased free wheeling of a steering wheel Insecure steering gear Tighten
Securely tighten the bolts steering transfer Tighten bolts
Loose or worn tie rod Replace the tie rod end
The steering wheel is hard to turn Slippage belt power steering pump Adjust the belt tension
Faulty drive belt power steering pump Replace the belt
Low fluid Add a liquid
The air in the fluid Bleed
Dirty or damaged hoses Replace hoses
Insufficient pressure created by the pump Repair or replace the pump
Sticking pressure control valve Replace
Internal leak in the power steering pump Replace damaged items
Excessive leakage of fluid from the rack and pinion steering gear housing Replace damaged items
Damage to the steering gear housing or a pressure control valve Replace damaged items
The steering wheel does not return to its original position properly Too much time turning the ball rod end Replace the tie rod end
If tightened too much rack steering gear Adjust the tension
Internal connection tie rod or ball joint are turned with difficulty Lubricate or replace the ball joint
Loose fastening of steering transfer bracket Tighten
Worn steering shaft joints or O-ring body Replace
Damaged steering gear Replace steering transfer
Damaged bearing pinion steering gear Replace
Dirty or damaged hoses Replace hoses
Damage to the pressure control valve Replace
Damaged bearing shaft power steering pump Replace
Extraneous noise of the steering The hissing sound of the steering transmission

All Power Steering publish additional noise. One of the most common - a hissing sound when the steering wheel is turned the vehicle is stationary. This sound is most evident when the steering wheel while pressing the pedal tormoza.Net no relationship between the noise and the steering. Do not replace the valve if the "hissing" noise does not become extreme. The new valve will also emit a slight noise.
A rattling sound in the steering transmission Backlash between the hose and the car body Route properly and fix hoses
Nezakreplena steering gear Fix steering transfer Secure the steering gear
Nezakreplen tie rod end and / or the ball joint Tighten
Worn tie rod end and / or the ball joint Replace
The noise in the power steering pump Low fluid Add a liquid
The air in the fluid Bleed
Do not tighten the bolts fastening the pump Tighten bolts

A warning

A soft noise should be heard immediately after the engine is started at an air temperature of -20 ?� C. This is due to the properties of the liquid used in the steering amplifier, and not a malfunction.






« previos page
Troubleshooting (steering without the amplifier)
next page »
Brakes

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.