REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
			Technical data
			Compression Test
			Adjusting the tension of the toothed belt
			Toothed belt
			Head cover and cork
			Camshaft
			Balancer shafts
			Repair of a head of cylinders
			Engine Supports
			Support member to be inspected
			Cylinder block
			Removing and installing engine and gearbox
			Crankshaft
			Piston
			Turbocharger
			Cooler air inflatable
			Air filter (ACL)
			Exhaust
			Troubleshooting
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Turbocharger

Check

PERFORMANCE ORDER

Check the inner surface of the body in contact with the turbine, the absence of cracks and deterioration due to overheating.
Make sure that the discharge flapper valve moves freely by hand.

Make sure that there is no damage on the inner surface of the housing in contact with the turbine.

The turbine shaft and with cracks in the blades or with broken blades can not be reused. If the turbine blades are slightly bent, the turbine can be used repeatedly, but with strongly bent turbine blades can not be reused.

Check the absence of impurities in the channel for the lubrication of the turbine shaft.

Check the output of the valve flap

Check the valve opening pressure of the valve. The nominal opening pressure: 13,2 kPa.

« previos page
Piston