add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Technical data
Checking the tightness of the cooling system
Check the radiator cap pressure
Checking coolant density
Tubes and pipes of the cooling system
Water pump
Radiator
Radiator cap
Thermostat
Coolant temperature
Engine radiator fan of cars with diesel engines of 2.0 liters
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Coolant temperature



Withdrawal

PERFORMANCE ORDER

  1. Drain the coolant to a level below the sensor.
  2. Disconnect the negative battery terminal and the connector from the sensor.
  3. Remove the coolant temperature sensor.

Check

PERFORMANCE ORDER

  1. Heat the coolant temperature sensor by immersing it in hot coolant.
  2. Measure the resistance of the sensor. Resistance: 2.31 - 2.59 ohms at 20 ?� C.

Setting

PERFORMANCE ORDER

  1. Apply sealant to the threads of the coolant temperature sensor and replace the sensor, having tightened its demanded moment. Sealant: Threebond ?�� 1324N or LOCTITE 262 Torque: 20-40 N ??? m.
  2. Connect the sensor electrical connector.
  3. Attach the wire to the negative terminal of the battery.
  4. Fill in the required amount of cooling required coolant.




« previos page
Thermostat		 next page »
Engine radiator fan of cars with diesel engines of 2.0 liters

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.