REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
			Technical data
			Adjust the clutch pedal
			Bleeding the hydraulic clutch
			Guided and clutch pressure plate
			Clutch Master Cylinder
			The clutch pedal
			Clutch slave cylinder
			Troubleshooting
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Adjust the clutch pedal

PERFORMANCE ORDER

Measure the distance from the front surface of the pedal to the carpet. Height of installation of a pedal of coupling (A): 166,9 mm.

If the height of installation of a pedal of coupling does not correspond to the desired value, adjust it as follows:

loosen the locknut and turn the screw to adjust the clutch pedal free play, and then tighten the lock nut;

After adjustment tighten the screw until it reaches the stop pedal, then tighten the locknut.

b. rotate the plunger until the desired height of the installation of a pedal, then tighten the locknut.

When adjusting the height of the plant or freewheel clutch pedal, be careful not to move the plunger to the clutch master cylinder.

Hand press the clutch pedal before occurrence of notable resistance and measure free wheeling size.
Free travel (B): 6-13 mm.

« previos page
Technical data