- If there are cracks in the protective cover, replace it and add grease in the joint.
- Several times rocking from side to side of the hinge pin of the spherical rod stabilizer.
- Screw on the hinge pin of the spherical self-locking nut and measure torque. Torque wrench, turn the self-locking nut of the pin and the ball joint on the back of the fifth measure torque, which should be attached to crank pin of the spherical hinge. Torque: 1,7-3,2 N ??? m.
- If the torque exceeds the allowable value, replace the stabilizer rod.
- If the torque is significantly lower than the allowable value, the ball joint can be reused if it is not jammed and is not excessive backlash.
|
|
