REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Sonata (2001 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Sonata
		General Information
		Engine
		Transmission
		Steering
		Chassis
		Brakes
		Body
			Technical data
			Check fault
			Overview
			Care body
			Repair small damages of a body
			Corrosion and car wash
			Exterior body parts
				Front fender
				Hood
				The trunk lid
				The front door
				Backdoor
				Moldings
				Sunroof Car
				Door mirror
				Front bumper
				Rear bumper
			Elements of interior
			Windshield
			Rear window
		Additional security
		Systems of heating, ventilation and air conditioning, air-
		Electrical
		Diagrams

printable version

Front fender

Withdrawal

Apply the parking brake and block the rear wheel stops.

Loosen the nuts of the front wheel. Lift the front of the car and establish on supports. Remove the front wheel.

Open the hood.

Unlock the front fender and mudguard.

Disconnect the connectors from the headlamp and turn signal lamp and remove the lamp housing.

Remove the front bumper.

Fig. 7.1. Location wing bolts

Remove the wing bolts (Fig. 7.1).

Remove the wing of the car, being careful not to scratch the body panels adjacent to the wing.

Setting

Installation is spent to sequences, return to removal, taking into account the following.

Set the front wing on the car, align the screw holes and secure it.

A WARNING

To avoid the formation of rust around bolts wing, apply sealant tape between wing and body panels.

When installing the wing, make sure that the gaps between the fenders and hood, as well as between the wing and the front door were uniform throughout.

« previos page
Exterior body parts

next page »
Hood