Bleeding power steering system

Hydraulic booster pumping system should be carried out in the following order:

- If the level of liquid in the system after a short start-up of the engine ceases to decrease, leave the engine running;

- Quickly turn the steering wheel several times to one and the other side to the air came out of the cylinder. It should not be severely twisted wheel. It will be enough if you turn on both sides of the hydraulic booster piston will slightly go up to the stop;

- During this operation, monitor the level of liquid in a tank. If it decreases, the fluid should be topped up immediately and held at the label Max. After topping up is necessary to wrap the cork. To continue the action as long as when you turn the steering wheel from side to side in the tank stops the appearance of air bubbles.