REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz Sprinter (from 1995 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	Sprinter
		General Information
		Engine
		Greasing system
			Appointment lubrication system
			Selection for the engine oil and replacing
			Brief description of the device
			Oil pump
			Removing and installing oil pan
			Removal and installation of the oil filter
			Oil radiator
			Dipstick
			The oil lines turbodiesel
		Cooling
		injection systems and exhaust
		Coupling
		Manual transmission
		Front Axle
		Rear axle and driveshaft
		Front and rear suspension
		Steering
		Brakes
		Electrical system
		Tires and wheels
		Automatic Transmission
		Map service
		Applications
		Diagrams

printable version

Oil radiator

Fig. 130. The oil cooler (1) is located on the rear side of the engine

Details of fastening of the oil radiator

Fig. 131. Parts attaching the oil cooler 1 - hex bolt; 2 - mounting bracket; 3 - a bolt; 4 - the oil cooler; 5 - a lining; 6 - a sealing ring; 7 - screw-threaded plug; 8 - a sealing ring; 9 - the case; 10 - a bolt; 11 - the directing plug; 12 - Spacing sleeve; 13 - mounting bracket; 14 - hex bolt

The oil cooler is installed on the rear side of the engine (Fig. 130). Because it is not visible, its dismantling is associated with certain difficulties. The easiest way to remove the pre-gearbox to obtain access to the radiator with the upper side of the engine. Details of mounting and connecting the oil cooler to the engine capacity of 2.9 liters shown in Fig. 131.

« previos page
Removal and installation of the oil filter

next page »
Dipstick