REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W163
		Introduction
		Controls and receptions of safe operation
		Current care and maintenance
		Engine
		System of cooling, heating and air conditioner
		The power supply system and exhaust
		Systems of an electric motor
		Manual box of a gear change
		The transmission automatically processed
		Transmission Line
			Clutch
				Assessment of the degree of wear on the clutch disc
				Removal, installation and check the clutch
				Removal and installation of the master cylinder
				Removal and installation of the executive cylinder of coupling
				Removal of air from a hydraulic path of the clutch
			Drive shafts
			Drive shafts
			The transfer case and differentials
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric

Assessment of the degree of wear on the clutch disc

Installation Details thermofilter crankcase RKPP

Checking wear clutch

The disc is OK

The disc is worn out

PERFORMANCE ORDER

For visual evaluation of the degree of wear of the friction linings of the friction clutch, release the fixing bolts (5) and remove thermofilter (6).
Checks are made using a special meter (4), introduced a plastic washer (2) of the executive cylinder flange (4), and wear on the thrust pin (3). With proper disk meter installed risks are completely hidden (arrow b). If the meter is fully seated on the finger, the risks remain open (arrow A), so that the disc has reached the wear limit values.

« previos page
Clutch