printable version

Removal and installation of loudspeakers

The center speaker dashboard

Details setting of the center speaker in the instrument panel

1, 2 - wiring connector 3, 5 - Bolts	4 - Panel H4 / 27 - Center speaker

PERFORMANCE ORDER

Turn on the auxiliary battery and connect it to a standard battery, then disconnect the negative cable last. 7 - Auxiliary battery 8 - terminal positive wire module 9 - negative terminal wire module W10 - Ground Battery Remove from dashboard central vents (see chap. Body). Remove the fastening screws (5) and remove the panel (4). Disconnect the connectors (1 and 2). Remove the mounting bolts (3) and remove the center speaker (H4 / 27). Installation is in the reverse order. Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor).

Tweeters

Details of installation of tweeters

1 - Bolts H4 / 1h1 - Left Tweeter	H4 / 2h1 - Right Tweeter

PERFORMANCE ORDER

Remove the instrument panel side deflectors (see chap. Body). Remove the fastening screws (1) and remove the dashboard tweeters (H4 / 1h1 and H4 / 2h1). Disconnect the speaker wiring. Installation is in the reverse order.

Door speakers

The front doors

Details for mounting the front door

1 - Connector 2 - Bolts H4 / 1 - Loudspeaker left door	H4 / 2 - Loudspeaker right door

PERFORMANCE ORDER

Remove the interior door trim (see chap. Body). Disconnect the speaker wiring, - the connector (1). Remove the mounting screws (2) and remove the door speaker (H4 / 1 and H 4/2). Installation is in the reverse order - track correctness of placing the speaker on the door.

Rear doors

Details for mounting the rear door

1 - Connector 2 - Bolts H4 / 5 - Speaker of the left door	H4 / 6 - Loudspeaker right door

The procedure is similar to the procedure described above for the front door speakers.

Woofer (woofer audio system Harman / Kardon) (complete code E66)

Details of installation bass speaker (woofer) audio system Harman / Kardon

1 - Protective grille 2, 3 - Bolts 4 - Connector wiring	A - Chashkoderzhatel H4 / 29 - Bass speaker (woofer)

PERFORMANCE ORDER

On models corresponding complete set (code FG2) Remove the rear chashkoderzhatel. Remove the mounting screws (2) and remove the protective grille (1). Remove the screws (3) and remove the woofer (H4 / 29). Disconnect the connectors (4) wiring. Installation is in the reverse order.