printable version

Removing and installing transceiver system Handsfree mobile telephone

Details of the installation of the transceiver system Handsfree mobile telephone

1 - Mounting bracket A - Connector fiber optic cable	In - wiring connector A35 - Transceiver

Describes a device used on models equipped with a mobile telephone on the basis of Nokia devices 6210 (code complete ET7) and 3110 (Code EV7).

PERFORMANCE ORDER

Turn on the auxiliary battery and connect it to a standard battery, then disconnect the negative cable last. 7 - Auxiliary battery 8 - terminal positive wire module 9 - negative terminal wire module W10 - Ground Battery Remove assemblage of the center console (see chap. Body). Disconnect from the transceiver (A35) optical fiber cable (A), - immediately plug the two waveguide special light-proof caps. Clenching his retainers, disunite a socket (B) wiring transceiver. Give fixture (two screws and one nut) and remove the tunnel transmission line mounting bracket (1). Remove the two located under the bracket (1) bolts and transceiver (A35). Installation is in the reverse order. Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor).