add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz G-class
Home
 
Mercedes-Benz
G-class
Introduction
Controls and operation receptions
Current care and maintenance
Specifications
The active warning system Maturity planned TO (ASSYST)
The routine maintenance schedule
General information about the settings,
Check fluid level, leakage control
Checking the condition of tires and pressure in them, the designation of tires and wheel rims, wheel rotation
Replacing the motor oil and oil filter
Check the brake system
Check the power supply system, replacement of the fuel filter
Check and replacement of hoses of an impellent compartment, localization of leaks
Checking the multirebernyh accessory drive belt
Check the functioning of the cooling system and frost coolant fluid replacement
Checking the exhaust system
Replacement ATF and filter AT
Visual check of tightness automatic transmission
Checking the suspension components and steering
Checking the status of anther drive shafts
Check the air conditioning system
Grease limiters door locks and cylinders
Visual inspection of safety belts and airbag modules
Verifying the headlights and horn
Check and replace wiper blades
Checking the status of the battery, care it and gymnastics
Replacing the cabin filter
Replacing the drive fluid differential lock
Replacing brake fluid
Check and replacement of spark plugs, check the status of high-voltage wires (petrol models)
Replacing the glow plugs (diesel models)
Engine
System of cooling, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Automatic Transmission
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Body
Onboard electric
Wiring
 


Hit Counter by Digits


print page printable version

The active warning system Maturity planned TO (ASSYST)



Downtime car without the battery system ASSYST in calculating the period of execution of the next planned the system ASSYST ignored and must be taken into account in the warning message is displayed.

Maturity indicator scheduled TO inform the vehicle owner about the optimal timing of maintenance and his testimony does not relate to the level of the motor oil.


Example display information about the timing of the onset of the planned TO (list A)

About a month before the next control period when the ignition system ASSYST provides automatic multi-function display one of the following messages:

  • ?�SERVICE A / B IN xx DAYS?� (amount of work to then A / B should be performed through xx days of data);
  • ?�SERVICE A / B IN xx km?� (amount of work to then A / B should be performed through xx kilometers);
  • ?�SERVICE A / B - DUE NOW!?� (PERFORM IN SCOPE TO A / B!);

After about 30 seconds, the message should disappear from the screen automatically. ). If necessary, the display can be turned off forcibly by pressing reset on the left side of the instrument cluster (see. Illustration Arrangement of control components on the dashboard and the steering column).

If the procedure is scheduled it was overdue, to display a warning ?�SERVICE A / B EXCEEDED BY xx DAYS?� (of work performed on TO A / V overdue xx days of data) or ?�SERVICE A / B EXCEEDED BY xx KM?� ( run up to the maximum allowable amount of work FOR PERFORMANCE TO A / B exceeded by xx KM), accompanied by an additional alarm buzzer.

When performing routine maintenance on the company's Mercedes-Benz service stations reset the system ASSYST station carried out by experts. If necessary (if the service was made under the terms of branded SRT) reset can be made the owner of the vehicle independently. Switch on the ignition - the on-screen multi-function display must be highlighted the basic page (see. Section A combination of devices, meters, warning lights and indicator lights). Hold down or appropriate control panel on the steering wheel as long as the screen is displayed the symbol or indicating the period of performing the next then the corresponding list. ) ?? ?????�???�?????�???�?� ?�?� ???�?�?�?�???? ?? ?�?�?�?�?????� ???????�?? 2 ???�????????, ???????� ???� ???????�???� ???� ???�?????�?�???�???? ???????�?�?�?????� ?�DO YOU WANT TO RESET SERVICE INTERVAL??� (?�?�?�???�???� ???�?????�?�?�?????? ???�?�???? ?????�???????�???? ???�?????? ???�?�?�?�?�?????�?? ?????) ?? ?�CONFIRM BY USING RESET BUTTON?� (?????�???�?�?�?�?????� ?????�???????�?? ???????????? ???�?�?????? ?????????�???????�), - ???�?? ???????�?�???�???�?�?????? ???�???????� ?�?�?� ???�?� ???�?�?????�?� ???� ???????????? ???�?�???� ???� ???????�?????�?�???? ???????�????????. Then press reset on the left side of the instrument cluster (see. Illustration Arrangement of control components on the dashboard and steering column) and hold for about two seconds until the screen flashes a message ?�DO YOU WANT TO RESET SERVICE INTERVAL? "(WISH TO MAKE CLEAR INDICATION OF ANOTHER THAT?) and?� CONFIRM BY USING RESET BUTTON ?�(confirm by pressing the reset), - for relief again, click on the button on the left side of the instrument cluster. Deadline next has to be transferred to the next control mark.

If resetting the system ASSYST accident was made to restore the original data should refer to experts firm HUNDRED Mercedes-Benz.

Call display ASSYST, if necessary, force can be produced through the appropriate function trip computer (see. Manual car - ask in shops of automobile literature).

The routine maintenance schedule (MOT) car on the lists A and B presented in Section routine maintenance schedule.

The running distance remaining before the next MOT determined driving style, and lies in the range from 15 000 to 22 500 km (365 ÷ 730 days). Economical manner of driving at medium engine speeds and avoiding short journeys contribute to its increase.





« previos page
Specifications
next page »
The routine maintenance schedule

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.