 printable version
Resetting Service-indicator
Button (1) zero service-indicator readings which are displayed on the display of daily run (2)
Location button (1) set the clock and manage service-indicator
When the time comes for regular maintenance on the lower counter (the counter of daily run) speedometer lights up one of the following symbols of the desired type of maintenance: - Oil change - service OEL or service Oil;
- Inspection service - service INSP. Approximately one minute after the start of the engine disappears reading notation necessary maintenance. Service company Volkswagen, which makes the maintenance of the Servicing after the work, using special equipment VAG-1551 sets the service-indicator to the initial (zero) position. If the maintenance was carried out not in the service enterprise a Volkswagen, service indicator should be set to the starting position.
| PERFORMANCE ORDER | | 1. With the ignition off, press and hold the button, the reset under a speedometer, see. Fig. Button (1) zero service-indicator readings which are displayed on the display of daily run (2). | | 2. Turn on the ignition and release the zeroing button only when the display shows the strokes - one of the images required type of service. If you re-press the reset, the service-indicator switch mode service INSP, see. Fig. Location button (1) set the clock and manage service-indicator. | | 3. The minute button to set the clock with digital display, turn right and on the clock to pull the arrow button display. The display shows the following indication "service-". | 4. Turn off the ignition.
A warning  When the battery disconnected service-indicator readings after maintenance are saved.
If the repair replaced necessary to reprogram the speedometer service-indicator. This operation must be carried out in the service enterprise a Volkswagen. If the service-indicator anew is not programmed, it is necessary to carry out maintenance work on a vehicle on the "Service Booklet" rather than service-indicator.
|
|
|
