 | 1. Unscrew the four bolts (indicated by arrows) on top of the radiator. |
 | 2. Pull the locking knob of the radiator (in the middle) is first up, then forward. |
| 3. If access to the engine compartment was still not enough to hang on a radiator and support the hinge brackets. |
| 4. Remove the radiator hose going to the expansion tank and plug it clean suitable screw. |
 | 5. Drive out the pins of the spacer clips the right and left and remove the clip from the heat sink bracket. |
| 6. Remove the radiator forward to the best of connected coolant hoses. Support the radiator, to insure the reliability of wire. |
| 7. If you need more space, remove the radiator completely (see. Subsection 2.16.2.1). |
