Replace anti-roll bar

To replace stabilizer:

- Remove the bolts fastening the stabilizer bar to the front and to the body;

- Remove the anti-roll bar. The front anti-roll bar is replaced without removing the stabilizer bar. To remove the need to turn away a nut, fixing the ball joint using the Allen key (Fig. 8.26). When you install the rack should apply the new nuts and tighten to 45 Nm.

- Install anti-roll bar, which put the fixing bolt anti-roll bar, tighten it so that the length of the protruding end of the thread was 3-5 mm, and then install the bolt stabilizer bar to body and tighten it to 25 Nm (Fig. 8.27).