REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Possible malfunctions of the body, their causes and remedies
			Removing, dismantling and installation of bumpers
			Removing and installing radiator grille
			Removal and installation of mudguards of wheels and Lockers
			Removal and installation of a forward wing
			Removal and installation of a lattice box vozduhopritoka
			Hood
			Door
				Removing and installing front door trim
				Replacing the glass front door
				Replacing the front window
				Replacing the outside handle of the front door
				Replacement of the internal handle of the front door lock actuator
				Replacing the front door lock switch
				Replacing the front door lock
				Replacing the terminator of opening the front door
				Removing and installing front door
				Removal and installation of an upholstery of a back door
				Replacement glass back door
				Replace the rear door window
				Replacing the outer rear door handles
				Replacement of the internal handle of the rear door lock actuator
				Replacement lock the back door
				Replace the rear door opening limiter
				Removing and installing rear door
			The trunk lid
			Manhole cover fuel tank filler pipe
			Seats
			Removal and installation of facing of a tunnel floor
			Restraint System (SRS)
			Rear view mirrors
			Dashboard
			Heater and air conditioning
			Interior fittings
			Removal and installation of facing of salon
			Removal and installation of facing the boot
			Windscreen wiper
			Replacement of the fixed glass body
			Removing and installing the attachment flanges of the battery
			Care body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

printable version

Replacing the front window

Front door windows are motorized. This section describes only Removing and installing electric window directly. Removing and installing electric window control unit are described in Sec. 10 "Electric" (see. "Replacing electric window control units").

You will need a key "10".

1. Remove the front door trim and moisture proof film (see. "Removing and installing front door trim").

2. Remove the front door glass (see. "Replacing the glass front door").

NOTE

Removing the glass from the door necessarily enough to disconnect it from the window and lock in the uppermost position, such as a screwdriver, line segments vinyl chloride tube of suitable diameter or masking tape.


3. Disconnect the wiring harness connector window.	4. Loosen seven nuts window to the inner door panel ...


5. ... and remove the windows from the cavity of the door through the mounting hole in its internal panels.	6. Install windows and all the removed parts in reverse order of removal.

« previos page
Replacing the glass front door

next page »
Replacing the outside handle of the front door