REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
			Technical data
			The mechanism of the tilt steering column
			Steering transfer without power steering
			Tie Rod
			Check backlash steering wheel for vehicles with power steering
			Checking steering angle of front wheels
			Check torque pin of the spherical rod end
			Check of effort of the steering wheel for vehicles with power steering
			Checking the steering wheel return to its original position
			Check the fluid level
			Liquid replacement in a hydraulic drive the power steering
			Bleeding the hydraulic system of the power steering
			Checking the belt drive power steering pump
			Checking the fluid pressure in the hydraulic system
			Steering transfer of cars with power steering
			The power steering hoses
			Power steering pump
			Troubleshooting (steering without the amplifier)
			Troubleshooting (power steering)
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Tie Rod

1 - Tie Rod;
2 - steel clamp;
3 - a protective cover;

4 - nut 16-34 N ??? m;
5 - tie rod end;
6 - a collar.

Withdrawal

PERFORMANCE ORDER

Remove the steering gear pinion steering and traction from the vehicle as an assembly.

Dismantling

PERFORMANCE ORDER

1. Secure the steering gear in a vise jaws shut with a soft material.
A warning When attaching the steering gear in a vice wrap steering transfer cloth and take care not to damage it during compression vise.
	2. Loosen the clamp and remove the protective cover from the steering gear.
3. Using a chisel, remove the nut on the left steering draft.
	A warning If rack must be removed, remove the left steering draft.
4. Move the rack is completely right and secure in the grip jaws shut with a soft material. Loosen and remove the left tie rod from the steering gear.
	5. Remove the right tie rod, repeat steps 3 and 4.

Check

PERFORMANCE ORDER

1. Check the tie rods and tie-rods for damage or deformation.
2. Check the protective covers for damage or distortion of shape.
3. Check the torque that must be applied to crank pin of the spherical hinge. The torque, which should be attached to crank pin of the spherical hinge: 2-5 N ??? m
	4. Check the operation of the ball joint and tie rod end play.

Assembly

PERFORMANCE ORDER

	1. After installing the steering rod tighten the nuts of their fastening torque and bend the collar nut into the keyway. Torque: 80-100 N ??? m
2. Attach a protective cover of steering draft a metal collar.
A warning Clamp fastening of a protective cover should be installed after adjusting the front toe.
3. Measure the progress of the transfer. Full speed transmission: 134 mm
	A warning Full speed transmission determines the maximum angle of the front wheels.
	4. Adjust the length of the tie rod and tighten the lock nut. Tie Rod Length: 185.2 mm Torque: 50-55 N ??? m

Setting

PERFORMANCE ORDER

Install the steering gear and the tie rod as an assembly.