add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Steering
Technical data
The mechanism of the tilt steering column
Steering transfer without power steering
Tie Rod
Check backlash steering wheel for vehicles with power steering
Checking steering angle of front wheels
Check torque pin of the spherical rod end
Check of effort of the steering wheel for vehicles with power steering
Checking the steering wheel return to its original position
Check the fluid level
Liquid replacement in a hydraulic drive the power steering
Bleeding the hydraulic system of the power steering
Checking the belt drive power steering pump
Checking the fluid pressure in the hydraulic system
Steering transfer of cars with power steering
The power steering hoses
Power steering pump
Troubleshooting (steering without the amplifier)
Troubleshooting (power steering)
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Check the fluid level




A warning

The hydraulic power-assisted steering add only the recommended liquid.


PERFORMANCE ORDER
1. Place the vehicle on a flat, horizontal surface.
2. Start the engine and warm up the power steering fluid to a temperature of 50 ~ 60 ?� C. Turn the steering wheel from lock to lock several times.
3. With the engine idling, turn the steering wheel from lock to lock several times.
4. Check that the power steering reservoir no foaming.
5. Turn off the engine and check the difference of liquid levels in a tank during operation or when the engine is off.

A warning

If the difference in fluid levels greater than 5 mm, remove air from a hydraulic drive power steering.
If the fluid level rises suddenly after the engine is switched off, it does not require further pumping hydraulic drive power steering.
Incomplete bleeding hydraulically assisted steering leads to the noise emitted by the pump and reduces the life of the pump.






« previos page
Checking the steering wheel return to its original position
next page »
Liquid replacement in a hydraulic drive the power steering

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.