1. Lift the front of the car and fix on supports. |
2. Disconnect the return hose from the tank. |
3. Connect an additional hose to the return hose, and drain the fluid into a suitable container. |
4. Disconnect the high-voltage wire from the ignition coil. Periodically turn the starter and at the same time some times turn a steering wheel from lock to lock to drain all liquid from the hydraulic drive power steering. |
5. Connect to the reservoir return hose and fill the tank liquid is recommended. |
6. Bleed the hydraulic power steering. Type of fluid power assisted steering: PSF-3 The liquid volume: 0.9 L |