 printable version
Radio
Refitting | - Disconnect the negative battery terminal.
 | - Unscrew the instrument cluster.
|
 | - Remove the ashtray, then remove the screws fixing the instrument cluster and remove it.
|
 | - Remove the instrument cluster and disconnect the connectors from the instrument cluster.
|
- Remove the radio.
- Installation is performed in reverse order of removal.
|
|
Cleaning the head and tape drive shaft | - To ensure optimal performance of the tape as necessary, clean the head and the drive shaft. Frequency of cleaning depends on the frequency of use of tape recorder and purity.
 | - To clean the head and the capstan, use a cotton swab dipped in alcohol. Clean the head and shaft.
|
|
|
Speakers Front speakers |  | - Remove the front door trim, remove the screws and remove the speaker.
|
- Installation is performed in reverse order of removal.
|
|
Rear Speakers | - Remove the rear seat.
 | - After removing the clamps, remove the separate upholstery.
|
 | - Remove the bolts and remove the clips holding the parcel shelf.
|
 | - Remove the lower mounting bolt rear seat belt.
|
 | - Remove the rear parcel shelf.
|
 | - Remove the screws and remove the speaker.
|
- Installation is performed in reverse order of removal.
|
|
Tweeter |  | - Remove the front door trim.
|
 | - Disconnect the connector and remove the tweeter.
|
- Installation is performed in reverse order of removal.
|
|
Check speaker |  | - Ohmmeter to check the resistance of the voice coil speaker.
|
- If you connect an ohmmeter speaker emits a click, then it is OK.
|
|
|
