 printable version
Adjusting the belts of automatic transmission (AT) (models from 1994 g.vyp.) (Every 48 000 km (30,000 miles) or every two years)
Adjusting tapes antibodies should be performed regularly in accordance with the schedule of routine maintenance of the car, preferably simultaneously with the replacement of the transmission fluid and filter (Section Replacement of fluid and filter automatic transmission (every 48 000 km (30,000 miles) or every two years)). The front tape (mode kickdown) The adjusting screw of the front tape is on the left wall of the transmission housing.  | Location of the adjusting screw (arrow) of the front tape transmission. |
| - Poddomkratte the front of the car and establish it on props.
- Approximately five revolutions, loosen the lock nut of the adjusting screws, then loosen a few turns of the screw itself. Make sure that the screw rotates freely, without biting; soak it in a penetrating oil if necessary.
- Tighten adjusting screw to the required torque (see. Specifications in the beginning of this chapter), and then give it back to the stipulated in the Specifications RPM. Hold the screw from turning, tighten the lock nut with demanded effort.
|
|
Rear Feed (step-down reverse gear)
|
