Shoulder rear seat belt

1. Remove the rear seat cushion.
2. Remove the side brackets.

1. Tilt the rear seat backrest.
2. Remove the two screws on the rear seat hinge.
3. Turn out one bolt side of the bracket.

3. Turn out one bolt of an arm of a lap belt.

4. Slowly release the belt to retract its inertia seat-belt tensioners as possible.
5. Remove the C-pillar trim.
6. Remove the back shelf.
7. Remove one bolt and one screw securing the belt tensioner.

1. Set the belt tensioner and tighten one bolt and one screw.
2. Install the rear parcel shelf.
3. Place the C-pillar trim.
4. Screw one bolt of an arm of a lap belt.

Torque: 40-55 N ??? m

5. Replace the side bracket.
6. Install the rear seat cushion.