The top furnish of the central rack

1. Remove the thresholds for front and rear doors.
2. The tool for removal release clamps of fastening finishing bottom furnish of the central rack.
3. Remove the bottom furnish of the central rack.
4. Remove the two screws securing the belt guide.
5. Remove the seat belt anchor bolt.

6. A tool for removing trim release clamps of fastening of the top furnish of the central rack.

1. Install the upper B-pillar trim in place.
2. Screw the anchor bolt belt.

Torque: 35-45 N ??? m

3. Replace the two screws securing the belt guide.
4. Install the lower B-pillar trim.
5. Set thresholds front and rear doors.