Wiper Arm

1. Turn on and turn off the windscreen wiper to the wiper arm with brushes stopped at the home position.
2. Remove the cover and turn the wiper arm nuts.
3. Check that the wiper arm on the driver's side has the designation ?�Dr?� (Driver Side), and the lever on the passenger side - the designation ?�As?� (Passenger Side). If there is no notation, apply them.

4. Remove the wiper arm.

1. Starting from the front passenger side, install the wiper arm to the pivot axis.
2. Screw the nut on the lever.

Do not operate the wiper on a dry windshield.

3. Replace the cover screws and check the area of movement of brushes on the windshield. The wiper arm on the driver must stop at a distance of 30 mm from the bottom of the glass and the wiper arm on the passenger side - at a distance of 37 mm from the base of the glass.