REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Magentis
		Engines
		Lubrication System
		Cooling system
		The control and toxicity
		Fuel system
			Technical data
			Multi-point fuel injection (MFI)
			Verification system of injection MFI
			The control lamp fault (MIL)
			Diagnostic trouble codes
			The coolant temperature sensor (ECT)
			The gauge of absolute pressure in an inlet collector (MAF) with the IAT
			Meter of air (MAF)
			The temperature sensor of air entering the engine (IAT)
			Throttle position (TP)
			The modulator control the speed of the crankshaft of the engine idling
			The heated oxygen sensor (HO2S)
			Camshaft position sensor (CMP)
			Sensor crank angle (CKP)
			Fuel injectors
			The solenoid valve system EVAP
			Knock sensor
			Potentiometer adjustment WITH idling (only for leaded petrol)
			Sensor power steering (PSP) [2,0 liter DOHC]
			:20. Throttle position (TP)
			Replacing fuel level sensor (2.0 L DOHC)
			Checking the fuel pump (2,0 l DOHC)
			Checking channel clearing of the canister with the activated coal (2,0 l DOHC)
			Check of the pressure created by the pump (2,0 l DOHC)
			Replacement of the fuel filter (2,0 l DOHC)
			Purification of the throttle device
			Checking channel purification with charcoal canister (2.5L V6)
			Replacing fuel level sensor (2.5L V6)
			Checking fuel pump (2.5L V6)
			Check of the pressure created by the pump (2.5L V6)
			Replacement of the fuel filter (2.5L V6)
			Adjusting the throttle position sensor (TP) (2,5 l V6)
			The pedal and the accelerator cable
			Fuel line
			Fuel tubes and tubes of system EVAP
			Fuel tank
			PROCEDURE FOR TROUBLE
			Troubleshooting
		Ignition system
		Coupling
		Transmission
		Power shafts, axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

The pedal and the accelerator cable

Withdrawal

PERFORMANCE ORDER

1. Remove the tip of the inside of the rope from the lever of the accelerator pedal.

2. Remove the bolts accelerator cable to the bulkhead.

3. Pull the left side of the accelerator pedal, and remove the control of the accelerator lever.

4. Turn out bolts and remove an arm of the accelerator pedal.

Check

PERFORMANCE ORDER

1. Check the accelerator cable and cable housing damage.
2. Check for smooth movement of the accelerator cable in the shell.
3. Check the accelerator pedal in the absence of bending.
4. Check the condition of the return spring.
5. Check the condition of the tip of the accelerator cable.
6. Check the operation of the accelerator cable.

Setting

PERFORMANCE ORDER

1. Grease the pivot point of the accelerator pedal.

2. To prevent vapor and exhaust gases in the interior of the vehicle, apply sealant to the threaded bolts of the accelerator pedal arm.

Torque: 8-12 N ??? m

3. Insert the tip of a cable of an accelerator in the grip end of the lever of the accelerator pedal.

4. Apply multipurpose grease around the tip of the accelerator cable.

« previos page
Adjusting the throttle position sensor (TP) (2,5 l V6)

next page »
Fuel line