Dipstick guide tube is located directly in front of the center of the engine (see.
Fig. 117 and
118). For its removal should take out the dipstick, unscrew the bolt at the top of the tube and remove it from the crankcase. In the lower part of the tube located gasket, which is replaced at every removal.
The assembly is carried out in reverse order. Bolt tube tighten to 10 Nm. If the dipstick tube and replaced with new, pay attention to their conformity with the type of engine. In
Fig. 132 shows a number stamped on the dipstick. When replacing the number in a new probe must match the old.
