1. In the presence of malfunctions check first the fuse in the fuse box.
2. If the fuse is OK, remove facing the rear window and check the reliability of the connection plug at the window on the left and the right. If necessary, clean the rust.
3. If the heater still does not work, check the electrical control unit comfort.
4. If a conductor of a heater broken, can be used to repair a conventional conductive lacquer. To do this, clean the damaged spot diluent or ethylene.
5. okleyte damage place on both sides of the adhesive tape and apply a small brush conductive lacquer.
6. Dry the paint at a temperature of about + 25 ?� C for 24 hours. This can also apply hot air. At a temperature of 150 ?� C the paint dries within 30 min.  | Attention! Do not operate the rear window before the paint is completely dry. To clean the damaged items, do not use gasoline or other solvents. |
|
