Removing and installing ambient temperature sensor

1. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

2. Depending on the model, clear the locker wing, address to Section Removal and installation of a forward wing locker.
3. Disconnect the connector of the temperature sensor.

4. Remove the temperature sensor (1) from the holder on the front bumper.

1. Installation is performed in reverse order of removal.
2. Attach a weight cable (-) battery when the ignition is switched off. Replace the cabin air filter box. If necessary, enter the code for the radio and set the time on the clock.