Removal and installation of the group switches to the left of the control panel

1. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

2. Remove the fuse box cover at the side of the instrument panel, refer to Section relays and fuses.

3. Remove the instrument panel handle (1) release the parking brake, remove the two screws (2) and press the lever down.

4. Remove the locking screw (3) of the circuit breakers.

5. Squeeze the two retaining springs and take out a group of switches (2) of the instrument panel.

6. Release the connection plug on the back of the group and disconnect switches.
7. Disconnect the regulator of range of light from the holder in a group of switches and slide to the side.

1. Installation is performed in reverse order of removal.
2. Attach a weight cable (-) battery when the ignition is switched off. Replace the cabin air filter box. If necessary, enter the code for the radio and set the time on the clock.