REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
			Specifications
			Troubleshooting - General Information
			The general principles of operation of the transmission control system, the control signals
			Adjustment of a drive switching AT
			Removal and installation of electro-hydraulic control unit switching
			Removing and installing AT torque converter
			Removing and installing selector module (ESM)
			Removal and installation of the sensor output speed AT
			Removal and installation of cooler ATF
			Flushing cooler ATF and oil lines
			Removal and installation of the electronic transmission control module (TCM / ETC)
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric
		Wiring

Removal and installation of cooler ATF

Details of installation of cooler ATF (except models 463.246)


1 - Bolting choke connector 2 - The hollow bolt couplings	3 - Nuts cooler ATF 4 - cooler ATF

Details of installation of cooler ATF (model 463.246)


1 - Bolting choke connector 2 - The hollow bolt couplings 3 - Nuts cooler ATF	4 - cooler ATF 5 - Support bracket

PERFORMANCE ORDER

Remove the protection casing (except model 463.246).
Drain the ATF (see chap. Current care and maintenance).
Release union nut (1) choke connector on the cooler (4), - ready to collect spilled liquid.
Remove the banjo bolt (2) couplings on the cooler (4), - ready to collect spilled liquid.
Release nuts (3) securing the oil cooler (4).
On models 463.266 (G55 AMG) pull from the cooler (4) the support bracket (5).
Remove the cooler (4), - ready to collect spilled liquid.
Installation is in the reverse order.