printable version

Removal and installation of mobile phone interface

Details of installation of mobile phone interface

1 - Support bracket 2 - Connector wiring 3 - Connector for the fiber optic cable	A34 / 4 - Interface CTEL N15 / 3 - TCM / ETC

The material is for models equipped with a mobile telephone on the basis of Nokia devices 6210 and 3110 (codes picking ET7, EV7, EN1 and EV8).

PERFORMANCE ORDER

Turn on the auxiliary battery and connect it to a standard battery, then disconnect the negative cable last. 7 - Auxiliary battery 8 - terminal positive wire module 9 - negative terminal wire module W10 - Ground Battery Remove assemblage of the center console (see chap. Body). Without disconnecting the wiring is separated from the support bracket (1) AT control module (N15 / 13) (see chap. Automatic transmission). Remove the support bracket (1). Disconnect the module interface CTEL (A34 / 4) connector to connect fiber optic cable - immediately plug the waveguides with special light-proof caps. Disconnect the wiring connector (2). Remove the interface module (A34 / 4). Installation is in the reverse order. Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor).