 printable version
Lock the back door on models the Versatile
Elements of fastening of a back door on models the Versatile
1 - rear door,
2 - upholstery of a back door,
3 - Tift with a recess for fixing the buffer doors
4 - Adjustable buffer back door,
5 - the ball joint mount the top of the tailgate support, 20 Nm
6 - pneumatic support the door,
7 - a casing of a shock plate lock the back door, | 8 - shock plate lock the back door,
9 - bolts, 25 Nm
10 - a nut, 20 Nm
11 - a nut, 10 Nm
12 - adjusting plate,
13 - Laying,
14 - arnir fastening the rear door,
15 - a bolt, 10 Nm
16 - rear door seal |
A warning  Air support back door 6 is removed and installed in the same way as the pneumatic support of a cowl.
After unscrewing the screws 10 on both sides of the door can be removed from the car door.
The adjustment plate 12 enables adjustment of the position of the rear door.
| PERFORMANCE ORDER | | 1. Remove the inner rear door trim. | | 2. Disconnect the electrical connector from the lantern light plate. | | 3. Remove the two nuts (2) and remove the plate door handle. | | 4. Disconnect electric sockets from the rear door lock. | | 5. Release the rod (8), lock the back door. | | 6. Remove the screws (10) and remove the rear door lock (9) from the back door. | | 7. Remove the bracket from the lock cylinder. | | 8. Unscrew and remove the executive engine of the central locking system. |
|
|
