 printable version
Trim lever (automatic transmission)
Withdrawal
Removing decorative trim gear lever
| 1 - clamps,
2 - a decorative overlay,
3 - an electric socket |
| PERFORMANCE ORDER | | 1. Remove the central console. | | 2. Remove the handle from the selector lever. To do this, move the sleeve under the handle down until it stops, remove the button and pull up the handle to remove the selector lever. | | 3. Release the two clips (1) on each side of a decorative overlay (2) of the selector lever and pulling upwards, remove the trim gear lever. | | 4. Disconnect from the decorative overlay selector electrical connector (3). |
|
Setting
| PERFORMANCE ORDER | | 1. Installation is made in sequence, return to removal. | | 2. Set the selector lever. To do this, the selector lever 2 and pull up to the stop side button and pressing, set the knob on the lever. | | 3. Establish the central console. |
|
|
