printable version

Door lock

Removing the door lock can only be made with the bracket.

Removing the door bracket can be made only after the liberation of the glass doors of the window latches. To do this, dip the glass doors to the level of technological holes in the bracket and release it.

If installed in the door power windows and they are at the moment for some reason does not work, drop the glass doors can be manually.

Withdrawal

Using the mandrel to release the lock (1) for the door lock to the bracket

Branch of the door lock from the bracket

1 - bracket 2 - wire, 3 - screwdriver, 4 - door lock

Branch safety rod from the door lock

1 - safety rod, 2 - pull rope

PERFORMANCE ORDER

1. Remove the front door trim. 2. Remove the lock cylinder. 3. Release the lock of the external handle of opening of the door. 4. Remove the bracket assemblies to the front door. 5. Using a mandrel to release the lock (1) for the door lock. See Fig. Using the mandrel to release the lock (1) for the door lock to the bracket. 6. Release of the bracket (1) Cable (2). See Fig. Branch of the door lock from the bracket. 7. Use a screwdriver to detach the bracket from the door door lock with a transition angle bracket. Transition angle bracket is attached to the door lock bolt and rivet. 8. Remove the door lock safety rod (1) by turning the door lock in the direction of the arrow shown in Fig. Branch of the safety rod from the door lock. 9. Release fastening rope shell pull to lock the door. 10. Turn the tip of the rope pull 90 ?� and pull it out of the hole in the lever lock the door.

Setting

PERFORMANCE ORDER

1. Installation is made in sequence, return to removal. 2. Check the door lock.