 printable version
The rear bench seat (Touring)
To increase the capacity of the luggage compartment rear bench seat can be folded down: a car with a split rear seat, each of the two parts of the seat can be folded separately. Rear headrests must be removed before folding the seat.
On vehicles with a net, you must first unlock the locking screws frame grid, and then to fold the rear seat. To avoid damage to the seats to be before folding rear seat to install the front seats so that the back seat is not put her in the front seat.
How to fold the rear seat bench
| Pull up on the loop in A seat cushion and fold it forward. |
| Pull up the button to unlock the seat back and fold down the backrest at the same time D. Will visible red mark on the button. |
The seat belt should not pass over the folded back, because otherwise the rear belt tensioners in the collision load.
How to install the rear seat back
| Fold back the seat back D and fix it firmly. Now a red mark on the release button C is no longer visible. |
Then, fold the seat cushion A to its original position. This should keep the average belt aloft since otherwise the belt is jammed between the backrest and cushion, and they can not be used. Make sure that the seat belts in the back seats in place have not been pinched and thereby damaged.
A warning  The rear seat backrest must be securely fixed to emergency braking no object of luggage would not be thrown forward.
|
