 printable version
Removing and installing bonnet
| Fig. 8.5. Elements of unlocking and locking the bonnet: 1 - hook; 2 - hex nut; 3 - flexible cable; 4 - the bonnet release lever; 5 - facing the bottom of the rack as well; 6 - a bolt; 7 - support bracket; 8 - the holder; 9 - clutch flexible cable; 10 - lock hood
|
Withdrawal Remove the grille.
Remove the grip flexible cable 1 up from the holder (Fig. 8.6). Disconnect the flexible cable. Disconnect plug 2 bonnet contact switch F266. Unscrew bolts 1 from the frame of the radiator and bumper bracket.
Remove bearing lock 3 with hood lock in the direction of sterlki in Figure 8.7.
NOTE For better visibility of the lock of a cowl and prop lock had been removed from the frame radiator. Prop lock can be removed from the radiator frame only in a downward direction. |
Remove the screws 1, 2 of the bonnet lock support 3 in the frame radiator.
Remove the hood latch up out of the hole in the frame of the radiator (Fig. 8.8).
| Fig. 8.9. Removing the cable lock actuator
|
To remove the cable lock actuator 3 Squeeze the loop 2 and the cable in the direction of the arrows in Figure 8.9. Razblokireutsya locking mechanism, and you can now remove the cable from the bonnet 1.
Setting Installation is carried out in reverse order. Torque: bolts 19 Nm.
NOTE When installing the bonnet should first tighten the bolts on the support of the castle. |
| 
