Fit seal the hatch panel

Check by means of cardboard strips approximately 0.3 mm thick (for example a business card), whether the density is uniform between the gasket and the body panel 2 along the entire perimeter of the hatch (Fig. 8.49).

Cardboard card should be pulled between the sealing panel and the body tight.

Remove the glass panel lifting and sliding sunroof

If the fit is too small, it is possible to push the seal panel 2 by means of a wedge 1: 3409.

Too tight fit to the body seal gasket press 1 with a pressure roller 3356 tightly to the panel (Fig. 8.50).

To fit the seal glass panel 3 should be removed.

Removing the fairing

Open lifting and sliding roof completely, insert the hook 3370 between the edge of the panel and fastening the fairing and pull the hook to release the fixation of the lateral cowl latch (left / right) (Fig. 8.51).

Pry the screwdriver attachment fairing of the guide rail (left / right).

Remove the cowl.