 printable version
Replacing the front door lock
You will need: a key TORX T40, Phillips screwdriver blade.
NOTE To remove the internal handle is necessary because the disconnect actuator rod from the lock installed on the door, it is very difficult. Comfortably furnished with locking rods and in turn to release the rod from the handle you want to remove it. |
| | 3. Undo the plastic retainer rod outside handle and remove the rod from the lever handle. | 4. Similarly disconnect draft from the lock switch. |
| | 5. Remove the three screws securing the lock to the door panel. | 6. Remove the lock from the car, moving it through the technological hole in the door panel. |
| | 7. If you change the lock, unclip the plastic clips and disconnect the linkage arm lock rods from the inside handle lock actuator ... | 8. cravings ... lock ... |
| | 9. ... and the draft from the outside handle. | 10. To remove the latch lock of the front door, remove the two screws securing it to the front of the body ... |
11. ... and lift the latch. 12. Install the front door lock and all the removed parts in reverse order of removal.
NOTE If necessary, adjust the clarity of locking the lock latch moving in a vertical or horizontal direction by loosening its tightness. |
|
